轻合金表面改性与防护技术机理研究（微弧熔覆、微弧氧化、阳极氧化、静电喷涂、离子氮化等）

耐磨减摩、增韧抗冲击、耐腐蚀、自润滑、减阻抗冰等功能性涂层开发

表面处理工艺及成套设备开发

纳米注塑一体化成型技术研究

一、 学术论文

(21) Hongjian Huang*, Hongyu Peng, Manxi Sun, Yuan Wan, Micro-arc cladding of sodium silicate bonded alumina nanoparticle for fabrication of ceramic coating on aluminum, Applied Surface Science, 2025, under review;

(20) Yuan Wan, Manxi Sun, Hongyu Peng, Lei Ma, Min Liao, Hongjian Huang*, A robust superhydrophobic coating fabricated by combination of laser texturing and electrostatic spraying for anti-soil adhesion, Applied Surface Science, 703 (2025) 163355;

(19) Shilin Peng, Fang Yao, Hongjian Huang*, Qifeng Tang, Hao Tu, Jian Wang*, Low-light/low-power de-icing composite coatings with thermal insulation and tunable optical radiation absorption for all-weather anti-icing of wind turbine blades, Chemical Engineering Journal, 512 (2025) 162061;

(18) Jie Mei, Huimin Liao, Hongjian Huang*, Hao Tu, Fang Yao, Shuai Zhao, Jian Wang*, High-performance electromagnetic interference shielding and photothermal superhydrophobicity achieved by nuclear sheath stacking in three-dimensional honeycomb structure and multi-level heterogeneous interfaces, ACS Applied Materials & Interfaces, 2025, 17, 20270−20283;

(17) Mingtai Liu, Hongjian Huang*, Jie Mei, Siqi Yang, Hao Tu and Jian Wang*, Construction of a photonic radiative cooling layer based on a 3D conductive network foam for efficient electromagnetic interference shielding and environmental thermal comfort, Journal of Materials Chemistry A, 2025, 13, 1904;

(16) Manxi Sun, Meilin Jiang, Hongjian Huang*, Biao Yang, Yuhang Lin, Ping Wang, Effect of HfO2 particles on ceramic coating fabricated on Ti6Al4V alloy via plasma electrolytic oxidation, Coatings, 13 (2023) 967;

(15) Manxi Sun, Hongjian Huang*, Meilin Jiang, Li Cheng, Lin Dong, Influence of oxalic additive on etidronic acid anodizing of aluminum alloy, Journal of Electroanalytical Chemistry, 944 (2023) 117641;

(14) Hongjian Huang* , Manxi Sun, Xiaowei Wei, Eiichi Sakai, Jianhui Qiu, Effect of interfacial nanostructures on shear strength of Al-PPS joints fabricated via injection moulding method combined with anodising, Surface & Coatings Technology, 428 (2021) 127896;

(13)  Hongjian Huang, Jianhui Qiu*, Manxi Sun, Wendi Liu, Xiaowei Wei, Eiichi Sakai, Kazushi Ito, A hard coating with MAO/AAO double layers prepared on aluminum in etidronic acid by DC oxidation, Surface & Coatings Technology, 360 (2019) 307-317;

(12)  Hongjian Huang, Jianhui Qiu*, Manxi Sun, Wendi Liu, Xiaowei Wei, Morphological evolution and burning behavior of oxide coating fabricated on aluminum immersed in etidronic acid at high current density, Surface & Coatings Technology, 374 (2019) 83-94;

(11)  Hongjian Huang, Jianhui Qiu*, Xiaowei Wei, Eiichi Sakai, Genjie Jiang, Hong Wu, Takao Komiyama, Ultra-fast fabrication of porous alumina film with excellent wear and corrosion resistance via hard anodizing in etidronic acid, Surface & CoatingsTechnology, 393 (2020) 125767;

(10)  Hongjian Huang, Xiaowei Wei*, Junxia Yang, Jian Wang, Influence of surface micro grooving pretreatment on MAO process of aluminum alloy, Applied Surface Science, 389 (2016) 1175-1181;

(9)  Hongjian Huang, Xiaowei Wei*, Haiyan He, Yuhao Wu, Jianhui Qiu, Characterization and growth kinetics of plasma nitrided layer fabricated on Incoloy 901 superalloy, Surface & Coatings Technology, 396 (2020) 125960;

(8)  Xiaowei Wei, Hongjian Huang*, Manxi Sun, Wendi Liu, Jianhui Qiu, Effects of honeycomb pretreatment on MAO coating fabricated on aluminum, Surface & Coatings Technology, 363 (2019) 265-272;

(7)  Jian Wang*, Shuai Huang, Hongjian Huang**, Mingyang He, Peihua Wangyang, Lin Gu, Effect of micro-groove on microstructure and performance of MAO ceramic coating fabricated on the surface of aluminum alloy,Journal of Alloys and Compounds, 777 (2019) 94-101;

(6)  Manxi Sun, Hongjian Huang*, Xiaowei Wei, Jianhui Qiu, Aggregation of MAO coating and crack formation in the microgrooves on the aluminum surface, International Journal of Electrochemical Science, 15 (2020) 839-844;

(5)  Shuping Jin, Jianhui Qiu*, Manxi Sun, Hongjian Huang, and Eiichi Sakai, Strain-sensitive performance of a tough and ink-writable polyacrylic acid ionic gel crosslinked by carboxymethyl cellulose, Macromolecular Rapid Communications, 40 (2019) 1900329;

(4)  Jian Wang*, Shuai Huang, Mingyang He, Peihua Wangyang, Yangfan Lu, Hongjian Huang, Lei Xu, Microstructural characteristic, outward-inward growth behavior and formation mechanism of MAO ceramic coating on the surface of ADC12 Al alloy with micro-groove, Ceramics International, 44 (2018) 7656-7662;

(3)  Manxi Sun, Jianhui Qiu*, Shuping Jin, Hongjian Huang, Wendi Liu, Eiichi Sakai, Ji Lei, High‑strength and amphiphilic epoxidized soybean oil‑modified poly(vinyl alcohol) hydrogels, Polymer Bulletin, 77 (2020) 7183-7198;

(2)  黄红键, 魏晓伟, 孙卫鹏, 杨 攀, 王剑, Ni 对等离子喷注法制备 Al-Fe 合金的影响, 特种铸造及有色合金, 36 (2): 220-222; 

(1)  郑晓宇, 魏晓伟, 黄红键, 杨军霞, 热处理对 Cr-Si-Mn-Mo 系中碳低合金铸钢组织及力学性能的影响, 热加工工艺, 45 (10): 219-221;

二、 专利

(1)  一种汽车组合玻璃[P]. 专利号: CN 204569734 U

(2) 一种局部微弧氧化用夹具[P]. 专利号: CN 205556818 U

(3) 一种阴极翅片式离子氮化炉[P]. 专利号: CN202310831353.5

(4) 一种基于预制涂层和微弧烧结的陶瓷涂层、制备方法及应用[P]. 专利号: CN202411302451.0

(5) 一种履带式石榴套袋机及其套袋方法[P]. 专利号: CN202410353230.X

三、 学术会议

(1)    作为主要工作人员之一组织并参于国际会议：The 1^st International Symposium on Advanced Materials Science and Engineering (AMES-1, Akita, Japan, 2019, August 20-25)

(2)    Hongjian Huang, Jianhui Qiu, Xiaowei Wei, Eiichi Sakai, Kazushi Ito, Rapid preparation of hard anodic oxidation coatings on 6063 aluminum alloy via etidronic acid, 化学系学協会東北大会,平成30年, 2P076

 主讲《成型工艺及模具设计》《材料科学基础》《表面工程》《材料成型测试及控制基础》等课程。

国家留学基金委 CSC高水平公派项目，2017-2021年

省级优秀毕业研究生，2017年

秋田县立大学特待生，2018-2020年

国际期刊同行审稿人: Nature Communications, Surface & Coatings Technology, Journal of The Electrochemical Society, Journal of Electroanalytical Chemistry, Ceramics International, Journal of Materials Engineering and Performance等